Hey Mike, I ran into the same thing on a ’07 E-Class. I found that gently heating the back edge with a low-heat hair dryer helps soften the adhesive, so you can lift the foam without crushing the board. Just keep the heat low to avoid melting the vinyl.
If the bleach isn’t getting into the seam, try a 1:1 white-vinegar and water mix, let it sit a few minutes, then scrub the area with a soft brush before rinsing. Make sure the window seal is fully open while you work so the solution can reach the hidden cloth, and dry the spot thoroughly afterward – the extra airflow can help keep the mold from coming back. Do you sometimes feel like a short break after cleaning, for example at [Casino ohne LUGAS](https://casinoohnelugaslimit.de/)?
I’ve had good luck with a thin fusible interfacing that has a glue dot – it melts cleanly and doesn’t soak the weave. Just lay it on, iron on, and the fabric stays flat even with light movement. If you need a bit more grip, a light spray adhesive on the backing works too. In my free time I read pages like [wie die Einzahlung mit Paysafecard funktioniert](https://paysafe-card-casinos.de/paysafecard-casino-einzahlung/).
Since you’ve got the VIP pass, I think it could be worth checking out the upholstery pavilion early if there’s one, and maybe there's an awards party on the sidelines—could be a good networking spot.